What Is The Mac Address
What Is A Mac Address Used For
Mac Address Stands For
What Does Mac Stand For

Each network-compatible device has at least one unique hardware ID – the media access control address (in short: MAC address). What this is all about and how you can find or rewrite the MAC address is explained below.

What is a MAC address?
Finding out your MAC address: a how-to guide
Assigning the MAC address using software

MAC address Definition. You do not need to be a computer expert to know what a MAC address is. It is a unique address for devices with network capabilities. We explain what you should know about the MAC address. Explanation: What is a MAC address? “MAC” stands for “Media Access Control,” this address is used to identify your device. There are three common technology definitions for MAC: (1) Short for Media Access Control. See MAC address or MAC layer. (2) When spelled Mac, the brand name and registered trademark for a line of computers from Apple Inc. See under Macintosh computer. (3) Short for Mandatory Access Control. Using Windows 10: Connect to a network. This method is only applicable if you are currently. Stands for 'Media Access Control Address,' and no, it is not related Apple Macintosh computers. A MAC address is a hardware identification number that uniquely identifies each device on a network. The MAC address is manufactured into every network card, such as an Ethernet card or Wi-Fi card, and therefore cannot be changed.

What is a MAC address?

Each device that is integrated into a computer network requires a network adaptor. This adapter receives a worldwide unique identification number from the manufacturer: the MAC address. This enables devices like desktop computers, tablets, or mobile phones to be identified in the network and addressed as required. If a device has several network adapters (for example, for several LAN connections or different communication standards like Ethernet, WiFi, FDDI, Bluetooth, or Token Ring), a different address is available for each standard.

The MAC address (short for media access control address) is the worldwide unique hardware address of a single network adapter. The physical address is used to identify a device in computer networks.

Since MAC addresses are assigned directly by the hardware manufacturer, they are also referred to as hardware addresses. With Microsoft Windows, the MAC address is referred to as the physical address. Apple uses the terms Ethernet ID, Airport ID, or WiFi address, depending on the communication standard. The term device address, on the other hand, is fuzzy, since a device can have several network adapters and therefore different MAC addresses.

The MAC address in practice

Conflicting MAC addresses are a basic requirement for error-free network communication.

Data transmission in computer networks is a complex communication process in which different requirements including reliability, security, and efficiency must be met. This can be illustrated using the OSI models (abbreviation for open systems interconnection) – a reference model developed by the ISO (International Organization for Standardization) that maps network communication to 7 layers. During data transmission, each layer of the OSI model is run through on both the sender and receiver sides.

MAC addresses are used on the backup layer (layer 2) of the OSI model – actually, the media access controlsublayer introduced by the Institute of Electrical and Electronics Engineers (IEEE).

In the extension of the OSI model designed by the IEEE, the backup layer (layer 2) is divided into the sublayers media access control (2a) and logical link control (2b).

The backup layer is located between the bit transfer layer (layer 1) and the switching layer (layer 3). While the bit transmission layer provides protocols and tools responsible for maintaining the physical connection, protocols on the backup layer control how different systems share the available transmission medium. Secure system connections are abstracted from the physical connection. The actual transmission of data packets takes place at the switching level via IP.

For example, if you want to send an IP packet over Ethernet, your computer transmits a data frame that is addressed to the target computer’s MAC address on the backup layer, according to the OSI model.

If the target computer is not in the local network, a router is addressed and instructed to forward it to the internet. Routers integrated into a social network also have a unique MAC address.

An Ethernet data frame contains information that is read out at different levels of the OSI model.

Data frames in IPv4 networks contain the following components:

Destination address (destination computer MAC address)
Source address (sender’s MAC address)
Control information for data flow control
User data (the data packet that needs to be transmitted later on the switching layer)
Checksums that ensure data integrity

A target computer that receives a data frame first reads it on the backup layer and compares the target address of the frame with its own MAC address. If the addresses match, the target computer starts interpreting the frame at the next higher level.

Network devices that are only used to forward data packets (repeaters) or manage parts of the network (bridges and switches) usually do not actively participate in network communication and so do not require their own MAC addresses.

To link the address assignment on the backup layer with the address assignment on the switching layer, the address resolution protocol (ARP) is used in IPv4 networks. Each computer in the local network maintains an ARP table whereby IP addresses are assigned to MAC addresses.

ARP is vulnerable to an attack pattern called ARP spoofing. The danger of ARP spoofing and the countermeasures you can take are discussed in the article above.

The new internet protocol standard IPv6 uses the neighbor discovery protocol (NDP).

MAC address syntax

MAC addresses in LAN or WLAN networks consist of 6 bytes (48 bits) and are written in hexadecimal notation. The use of separators such as hyphens or colons between two bytes increases readability.

The following example shows the MAC address of a desktop computer in binary and hexadecimal format:

In our example, we use canonical representation of the bit sequence. This corresponds to the order in which MAC addresses are transmitted in Ethernet. Other communication standards like Token Ring provide for bit-reversed transmission, starting with the most significant bit.

The bit sequence of each MAC address is divided into 4 areas, each of which encodes different information.

Bit 1 (receiver): The first bit of the MAC address specifies whether it is an individual or group address. This bit is called I/G (short for individual/group). If I/G = 0, it is a unicast address for a single network adapter. Multicast addresses are identified by I/G = 1 and are addressed to several receivers.
Bit 2 (registry): The second bit of the MAC address indicates whether it is an address with global validity (universal) or whether the address has been assigned locally (local). The bit is called U/L. If U/L = 0, the address is valid worldwide as a universally administered address (UAA). Addresses that are only locally unique are called locally administered address (LAA) and are marked with U/L = 1.
Bit 3–24 (manufacturer identification): Bits 3 to 24 encode an identifier (organizationally unique identifier, OUI), which is assigned exclusively to hardware manufacturers by IEEE. The assignment of OUIs is usually public and can be determined via databases. A corresponding service is available, for example, on aruljohn.com.
Bit 25-48 (network adapter identifier): Bits 25 to 48 provide device manufacturers with 24 bits for assigning a unique hardware identifier (organizationally unique address, OUA). This means that 2²⁴ (= 16.777.216) unique OUAs can be assigned per OUI.

Table: Subareas of an MAC address

Label

Mac Address What It Stands For